2026-01-26

X-Band Radar Component Testing: Generating Clean Pulsed Signals for Marine and Weather Applications

You are here:

X-Band Radar Component Testing: Generating Clean Pulsed Signals for Marine and Weather Applications

While automotive radar has moved to 77 GHz, X-band (8–12 GHz) remains the standard for marine navigation, weather monitoring, and military fire control radars. Testing the Traveling Wave Tubes (TWTs) or Solid State Power Amplifiers (SSPAs) in these systems requires a signal source capable of precise pulsed operation.

High-Fidelity Pulse Modulation The CAMS9K20G features a built-in pulse modulator with 100 ns minimum pulse width and <20 ns rise/fall times. This allows engineers to simulate the short pulses used for high-resolution target detection.

Spurious-Free Dynamic Range Detecting small targets amidst sea clutter requires a radar receiver with high dynamic range. The signal generator used for testing must be free of spurious artifacts. The CAMS9K20G delivers non-harmonic spurious levels < -72 dBc, ensuring that ghost signals do not interfere with sensitivity measurements.

Explore Pulse Features for Radar

Why Spurious Performance Matters in RF Signal Generators

When evaluating an RF signal generator, frequency range and output power are usually the first specifications engineers check. However, in many practical RF and microwave test environments, spurious performance often has a much larger impact on actual measurement quality.