Modern Electronic Warfare (EW) receivers are tasked with operating in increasingly congested spectral environments, where they must detect, classify, and locate hostile radar threats. These modern tactical radars utilize agile waveforms with increasingly narrow pulse widths to improve range resolution and reduce intercept probability. To validate the performance of an EW receiver, the test equipment must be capable of generating pulses that mimic these agile threats with extremely high fidelity.
Fast Rise Time & Narrow Widths The CAMS9K40G is equipped with a high-performance internal pulse modulator designed for this exact purpose. It supports a minimum pulse width of 100 ns, allowing engineers to simulate high-resolution tactical radar signatures. Crucially, the pulse edges are sharp, with typical rise/fall times of 15 ns (for carriers >100 MHz). This preserves the high-frequency spectral content of the pulse, which is essential for testing the receiver’s bandwidth and transient response capabilities.
Signal Isolation and On/Off Ratio For accurate testing of receiver sensitivity during the “pulse off” state (inter-pulse period), signal isolation is critical. The CAMS9K40G offers a typical On/Off ratio of 70 dBc. This high isolation ensures that RF leakage from the generator during the “off” state does not desensitize the receiver or trigger false positives in the detection logic, ensuring a valid test of the receiver’s dynamic range.
















