2026-01-26

Beyond CW: Why Modern Millimeter-Wave Testing Requires Comprehensive Analog Modulation

You are here:

Beyond CW: Why Modern Millimeter-Wave Testing Requires Comprehensive Analog Modulation

In the landscape of millimeter-wave (mmWave) testing, engineers are often forced to choose between cost-effective Continuous Wave (CW) sources and expensive, fully-featured vector signal generators. However, for applications involving radar receivers, telemetry links, and EMC immunity, a simple CW tone is insufficient. The Corech CAMS9K40G bridges this gap by offering a 40GHz platform with comprehensive analog modulation (AM/FM/ØM) and pulse capabilities as standard features.

The Limitation of CW-Only Sources While CW sources are adequate for simple S-parameter measurements or Local Oscillator (LO) substitution, they cannot verify receiver demodulation performance or signal-to-noise ratios (SNR) in modulated conditions. Testing a Ka-band receiver’s resilience to amplitude variations or frequency drift requires a source capable of precise Amplitude Modulation (AM) and Frequency Modulation (FM).

Built-in Analog Modulation Suite The CAMS9K40G integrates these capabilities directly into the hardware, eliminating the need for external modulators.

  • AM Depth: Adjustable from 0% to 99% with a resolution of 1%, ideal for simulating signal fading or verifying AGC (Automatic Gain Control) circuits.

  • FM Deviation: Supports deviations up to N × 5 MHz, allowing for rigorous bandwidth and selectivity testing.

  • Phase Modulation (ØM): Essential for BPSK/QPSK telemetry link verification, with a maximum deviation of 5 rad.

Conclusion For R&D labs requiring versatility without the price tag of a vector source, the CAMS9K40G provides a “lab-in-a-box” solution, covering 9 kHz to 43 GHz with full analog modulation support.

View CAMS9K40G Specifications & Datasheet

Why Spurious Performance Matters in RF Signal Generators

When evaluating an RF signal generator, frequency range and output power are usually the first specifications engineers check. However, in many practical RF and microwave test environments, spurious performance often has a much larger impact on actual measurement quality.